UL Classified Assemblies and Listings

UL Classified Ratings and Listings for BlazeFrame Assemblies
Assembly Rating – 1, 2, and 3 Hr (Shaft Assemblies)
L Rating at Ambient – Less than 1 CFM/Lin Ft
L Rating at 400 F – Less than 1 CFM/Lin Ft
Nominal Joint Width – 3/8 to 1 1/2 In.
Class II and III Movement Capabilities – 100% Compression or Extension

	HW-D-0495 – Beam Penetration
	HW-D-0496 – Shaft Wall under PT or Structural Concrete
	HW-D-0497 – Parallel to Beam (Shaft Wall)
	HW-D-0498 – Standard Wall under PT or Structural Concrete
	HW-D-0499 – Parallel to Fluted Deck
	HW-D-0500 – Standard Wall perpendicular to Fluted Deck
	HW-D-0501 – Parallel to Beam (Standard Wall)
	HW-D-0502 – Parallel & Edge Overlap Under Structural Support
	HW-D-0503 – Under “Layer Type C” UL G500 Series
	HW-D-0504 – Shaft Wall under Fluted Deck
	HW-D-0505 – Chase Wall under PT or Structural Concrete
	HW-D-0506 – Chase Wall Perpendicular Fluted Deck
	HW-D-0512 – Perpendicular Coated Pan Deck w/Fire Proofing Flute Fill
	HW-D-0513 – Perpendicular Bare Pan Deck w/Mineral Wool Fill
	HW-D-0543 – Stair Shaft Floor Line Joint (093 Control Joint Optional)
	HW-D-0544 – Parallel to Fluted Deck (Ribbed Flute Plate Cover)
	WW-S-0055 – Vertical Wall to Wall Joint
	HW-D-0558 – Offset Leg Standard Wall Protected Roof Deck/Substrate
	HW-D-0559 – Offset Leg Shaft Wall Protected Roof Deck/Substrate
	HW-D-0597 – Parallel to Beam (Z-clip / Drywall Rip)
	HW-D-0631 – Shaft Wall Parallel & Edge Overlap Under Structural Support
	HW-D-0632 – Bare Slotted Under PT or Structural Concrete with Caulks
	HW-D-0633 – Bare Slotted Perpendicular & Parallel Fluted Deck Flute Cover with Caulks
	BW-S-0021 – Bottom of Wall